Shark Pulsar Technical Dive Strobe

The 150 metre depth-rated Shark Pulsar Technical Dive Strobe was made with the technical deep water diver in mind. Its two settings allow it to be used as a powerful pulsing strobe or a 270º constant underwater light.

The strobe is powered by a rechargeable 5000 mAh, 18Wh 26650 Li-ion battery, and its high-intensity 3500 lumen LED light source has a 50000-hour chip life. 

The Shark Pulsar will have an approximate burn time* of 150 minutes in constant light mode, extending to 720 minutes in strobe mode. 

This strobe provides a clear signal from afar, with its powerful pulsing light emitting in all directions. Popular among technical deep divers and one of our top-selling products, it can be used as a marker on the seabed (such as the end of a shot line on a wreck) or at a specific point on the shotline itself. It can also be used as a surface marker in case of an emergency to alert responders. 

The Shark Pulsar Strobe is operated with a magnetic rotary switch with off/continuous/strobe modes.

Product specifications

• Materials: T6061 aluminium with hard anodised surface finish
• Light source: High-intensity LED, chip life 50000hrs
• Light output: 3500 Lumen
• Colour temperature 6000K - 65000K
• Beam angle: 270 degrees spot
• Depth rating: 150m
• Switch type: Magnetic with rotating ring
• Function: ON - STROBE - OFF
• Burn time: 150min (ON) - 720min (STROBE)
  
• Battery type: 1 x 26650 Li-ion rechargeable battery 18Wh
• Length 13cm
• Diameter 4cm
  
• Net weight: 140g excluding battery
• Warranty: Strobe 1 year / Battery & Charger 6 months

* As with all lights, quoted burn times are approximate and vary according to ambient temperature and the number of recharge cycles of the battery (i.e. battery health level).

SHARK PULSAR MANUAL